Field notes · November 16, 2026

From Bare Bank to Willows: Leaf Ninjas and TerraRevive Near Kamloops

See how Leaf Ninjas used TerraRevive on a bioengineered riverbank near Kamloops, BC, from bare bank in spring 2025 to dense willow growth a year later.

July 2026. One year on, Tyler from Leaf Ninjas standing in the growth for scale.
Reclamation

Some of the best work happening in restoration right now is being done by crews like Leaf Ninjas. They're based out of Rocky View County, Alberta, and they do riparian work, slopes, native plantings, overseeding and bioengineering. On a bioengineering job they build live plant material right into the bank, so the plants end up holding the bank together.

Their goal is simple. Get native plants to survive and establish as fast as possible on ground that's been torn up. Brett Schritt, Senior Project Manager at Leaf Ninjas, put it like this:

"Any time we can find something that even increases survivability, growth, speed of establishment etc by 10% we jump at it."

That's a high bar, and it's the bar they set for anything they bring onto a site. So we were pretty happy when they started putting TerraRevive in the ground with their plants.

Spring 2025. TerraRevive going in with the live cuttings as the bank is rebuilt. Spring 2025. TerraRevive going in with the live cuttings as the bank is rebuilt.

The problem with stripped ground

Banks and slopes that have been stripped or rebuilt don't give plants much to work with. There's almost no organic matter and not much soil biology left. You can put good plant material in, but if the soil can't support it, survival and establishment suffer.

That's exactly what TerraRevive is built for. It's an organic pellet that puts organic matter back into the soil and feeds the soil biology that helps plants get going. It's all about soil health.

Three ways in, depending on the job

Leaf Ninjas use TerraRevive three different ways, so it's working right where the roots are:

  • Native plantings. Top dressed around each planted native, under the mulch.
  • Overseeding. Spread with the seed. In Brett's words, it's there "to have something puff up and provide nutrients and moisture retention for germination."
  • Bioengineering. Laid in layers with the propagules while they rebuild the bank profile.

Spring 2025. Working along the rebuilt bank, one layer at a time. Spring 2025. Working along the rebuilt bank, one layer at a time.

The bank rebuild near Kamloops

The photos in this post are from one large bioengineering bank rebuild near Kamloops, BC. The bank was rebuilt in layers in spring 2025, with TerraRevive going in alongside the live cuttings as each layer went up. When construction wrapped, it was a bare, freshly built bank with every layer built and matted.

Spring 2025. The finished bank before green up, with every layer built and matted. Spring 2025. The finished bank before green up, with every layer built and matted.

Then the first season started.

May 2025. Cuttings and native plants starting through the erosion matting. May 2025. Cuttings and native plants starting through the erosion matting.

June 2025. Green coming in along every layer, with drip irrigation on the bank. June 2025. Green coming in along every layer, with drip irrigation on the bank.

July 2025. Willows filling in the bank in the first summer. July 2025. Willows filling in the bank in the first summer.

One year later

A year on, the bank is covered in willow and native growth along the whole length of the rebuild.

June 2026. One year later, growth along the whole bank. June 2026. One year later, growth along the whole bank.

July 2026. Dense willow growth along the water. July 2026. Dense willow growth along the water.

And if you want a sense of scale, that's Tyler from Leaf Ninjas standing in it.

July 2026. One year on, Tyler from Leaf Ninjas standing in the growth for scale. July 2026. One year on, Tyler from Leaf Ninjas standing in the growth for scale.

What Brett's seeing

Leaf Ninjas have a crew on these sites every season, so they see first hand how a bank comes in. Here's what Brett told us:

"Been noticing a big difference on sites we've been using your pellets, so happy to support you!"

"I have noticed a marked difference from when we started using them."

Coming from a crew that sets the bar where Leaf Ninjas do, that means a lot to us.

What's next

We're setting up side by side plots with Leaf Ninjas on their farm, testing native plants and bioengineering propagules with and without TerraRevive. We'll share those results when they're in.

Working on disturbed ground?

If you're rebuilding banks, reclaiming slopes or getting natives established on stripped ground, we'd love to talk about your next site. Every site is different, so we set your rate when we quote. Reach us at info@terrapreta.ca.

TerraRevive is proudly made in Sundre, Alberta.

Thanks to Brett, Tyler and the whole Leaf Ninjas crew for letting us share this one.

Request a quote

Tell us about your site or your field.

Every quote comes with a rate recommendation.